Solite Custom Fire 2.0 Surf Booties 8mm

Recommended Water Temps:32F+.

Sizing Tip:Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a 10. Women should order 1-1.5 sizes lower to convert from Men’s sizing. So if you are a Women’s 8, order a Men’s 7. If you are a Women’s 8.5, also order a Men’s 7.NOTE:If your feet are exceptionally narrow or low volume, you may want to size down even more.

Pro-Level Performance in the Coldest Conditions

The 8mm Custom Fire has revolutionized frigid-water warmth and performance with Solite’s unmatched light-weight and renowned barefoot feel. While regular neoprenecold-water boots have a spongy, sloppy feel underfoot,the heat-moldableThermofoam Soleand secure360-Wrap Strapgives you a direct connection to your board with zero delay in response.Perfect fit equals instant response and comfort, and theRound-Toe designinsures all toes touch each other for maximum warmth.The Thermofoam Sole is 8mm thick in the toes/heels for extra protection and 7mm elsewhere.

Thermal Rebound Lining from Top to Bottom

The 20228mm Custom Fire gets even warmer with the addition of theThermal Rebound internal liningand a matchingRound-Toe 1mm Neoprene Heat Booster Sock, also with Thermal Rebound lining.

These socks are a critical component of our Solite “system”, particularly in the frigid waters where the 8mm Custom Fires are used. Benefits of the 1mm Neoprene socks are numerous:

1. Add 5-10F warmth to the boots for longer sessions in frigid conditions.
2. Increase comfort with a soft, plush barrier between the foot and the Thermofoam sole.
3. Make the boots easy on/off with a low-friction outer surface.
4. Keep boots smelling fresh since the socks can be easily washed/dried separately.

Tatex Flex-Spine

Further fortifying the exterior is our exclusiveTatex Flex-Spine.The Flex Spine stiffens the back of the boot, actingas a shoe-horn for easy entry and also providinga sticky surface to grab your wetsuit leg and prevent flushing.

EZ-O Cuff withOverkill Seams

TheEZ-O Cuff designprovides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 5mm thickness. Since booties take serious abuse, we cut no corners on our neoprene seam construction. OurOverkill neoprene seamsare triple-glued, blind-stitched, then sealed on the exterior with liquid seam seal for maximum durability and longevity.

Reinforced Stealth-Loop

To ease on/off, we’ve integrated our low-profileStealth-Loopin the heel. The Stealth Loop is laminated between the neoprene and our co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption.